| | |
 | 0.7 mm I.D. 2.35 mm O.D.
with 6' Stripped End 24 AWG Cord
Philmore # 48-410
Plug is molded to a six foot cable. The other end is stripped and tinned. Mates with:
- Jack: # 335
- PC Jack: # 205
Wire Gauge: 24 AWG Complies with EIAJ (Electronic Industries Association of Japan) class 1 or I RC-5320 Standards.
Click Here for Catalog Picture
Price: $2.29
|
| |
|
1.3 mm I.D. 3.5mm O.D. Right Angle
with 6' Stripped End 24 AWG Cord
Philmore TC204
Right angle plug is molded to a six foot cable. The other end is stripped and tinned. Mates with
- Inline jack: # 256
- Chassis jack: # 313
- PC board jack: # 211
Shielded 24 gauge cable (not zip cord as shown)
Barrel Length: 11.50 mm
Click Here for Catalog Picture
Price: $1.96
|  |
| |
|
| | 1.4 Center Pin 6.5mm O.D. Right Angle
with 6' Stripped End 18 AWG Cord
Philmore TC265
Right angle plug is molded to a six foot cable. The other end is stripped and tinned.
- Mates with chassis jack # 365
- Barrel Length: 0.365" (9.27mm)
- Wire Gauge: 18 AWG
- Complies with EIAJ (Electronic Industries Association of Japan) class 5 or V RC-5320 Standards.
- Made in Japan
This cable is used on the Fujitsu ST5031d Tablet PC
Click Here for Catalog Picture
Price: $6.49
|
| |
|
1.7 mm I.D. 4.0 mm O.D. Right Angle
with 6' Stripped End 24 AWG Cord
Philmore TC240
Right angle plug is molded to a six foot cable. The other end is stripped and tinned. Mates with:
- Inline jack: # 262
- Chassis jack: # 340
- PC board jack: # 207
- Tip Color is Yellow
- Wire Gauge: 24 AWG
- Complies with EIAJ (Electronic Industries Association of Japan) class 2 or II RC-5320 Standards.
- Barrel Length: 10.4 mm
- RoHS Compliant
Click Here for Catalog Picture
Price: $1.96
|  |
| |
|
| | 1.7 mm I.D. 4.75 mm O.D. Right Angle
with 6' Stripped End 24 AWG Cord
Philmore TC275
Right angle plug is molded to a six foot cable. The other end is stripped and tinned. Mates with:
- Inline jack: # 263
- Inline chassis jack: # 375
- PC board jack: # 220
-
Wire Gauge: 24 AWG
- Barrel length: 9.6mm
- Complies with EIAJ (Electronic Industries Association of Japan) class 3 or III RC-5320 Standards.
- Barrel Length: 9.50 mm
Click Here for Close Up Picture
Price: $1.96
|
| |
|
1.7 mm I.D. 4.75 mm O.D.
with 6' Stripped End 20 AWG Cord
Calrad 55-837
Straight plug is molded to a six foot 20 AWG cable. The other end is stripped and tinned. Mates with:
- Inline jack: # 263
- Inline chassis jack: # 375
- PC board jack: # 220
-
Wire Gauge: 20 AWG
- Complies with EIAJ (Electronic Industries Association of Japan) class 3 or III RC-5320 Standards.
- Barrel Length: 9.32 mm
Click Here for Catalog Picture
Price: $2.56
| |
| |
|
| | 1.7 mm I.D. 4.75 mm O.D.
with 6' Stripped End 18 AWG Cord
Calrad 55-837-18
Limited to stock on hand.Straight plug is molded to a six foot 18 AWG cable. The other end is stripped and tinned. Mates with:
- Inline jack: # 263
- Inline chassis jack: # 375
- PC board jack: # 220
-
Wire Gauge: 18 AWG
- Complies with EIAJ (Electronic Industries Association of Japan) class 3 or III RC-5320 Standards.
- Barrel Length: 9.32 mm
Click Here for Catalog Picture
Price: $3.49
|
| |
|
2.1mm ID x 5.5 mm OD
To Solderless Terminal
Philmore 48-1259
This plug is a time saving and inexpensive way for installers to terminate cables with DC power jacks. Only a small Phillips screw driver is required. There is a molded plug on one end, and a solderless terminal at the other end of a 2" flexible cord. The polarity is indicated by a + on the terminal, which is connected to the tip (center) of the DC plug. The solderless terminal has a polarity marking and will accomodate up to 14 AWG wires. Both ends have a flexible strain relief.
- Mates with inline jack # 257
- Mates wtih inline jack with cord: # 48-255, 48-257
- Mates with chassis jack # 209, 247, 321, 2112
- Mates with PC board jack # 212
- Barrel Length: 9 mm
- Wire Gauge: 20 AWG
Price: $1.96
|  |
| |
|
| | 2.1 mm I.D. 5.5 mm O.D. Right Angle
with 6' Stripped End 24 AWG Cord
Philmore TC210
Right angle plug is molded to a six foot cable. The other end is stripped and tinned. Mates with:
- Inline jack: # 257
- Inline jack with cord: # 48-255, 48-257
- Chassis jack: # 209, 247, 321
- PC board jack: # 212
-
Wire Gauge: 24 AWG
- Barrel Length: 11.50 mm
- RoHS Compliant
Click Here for Catalog Picture
Price: $1.96
|
| |
|
2.1 mm I.D. 5.5 mm O.D. Right Angle
with 6' Stripped End 20 AWG Cord
Calrad 55-838B-RT
Right angle plug is molded to a six foot cable. The other end is stripped and tinned. Mates with:
- Inline jack: # 257
- Inline jack with cord: # 48-255, 48-257
- Chassis jack: # 209, 247, 321
- PC board jack: # 212
-
Wire Gauge: 20 AWG
- Barrel Length: 10.0 mm
Price: $2.79
| |
| |
|
| | 2.1 mm I.D. 5.5 mm O.D. Right Angle
with 6' Stripped End 18 AWG Cord
Philmore 48-218
Right angle plug is molded to a six foot cable. The other end is stripped and tinned. Mates to:
- Inline jack: # 257
- Inline jack with cord: # 48-255, 48-257
- Chassis jack: # 209,247,321
- PC board jack: # 212
-
Wire Gauge: 18 AWG
- Barrel Length: 11.50 mm
Click Here for Catalog Picture
Price: $2.56
|
| |
|
2.1 mm I.D. 5.5 mm O.D.
with 3' Stripped End 20 AWG Cord
Calrad # 55-838B-3
Plug is molded to a three foot cable. The other end is stripped and tinned. Mates with:
- Inline jack: # 257
- Inline jack with cord: # 48-255, 48-257
- Chassis jack: # 209,247,321
- PC board jack: # 212
-
Wire Gauge: 20 AWG
- Barrel Length: 9.5 mm
Click Here for Catalog Picture
Price: $2.54
| |
| |
|
| | 2.1 mm I.D. 5.5 mm O.D.
with 6' Stripped End 20 AWG Cord
Calrad # 55-838B
Plug is molded to a six foot cable. The other end is stripped and tinned. Mates with:
- Inline jack: # 257
- Inline jack with cord: # 48-255, 48-257
- Chassis jack: # 209,247,321
- PC board jack: # 212
-
Wire Gauge: 20 AWG
- Barrel Length: 9.5 mm
Click Here for Catalog Picture
Price: $2.66
|
| |
|
2.1 mm I.D. 5.5 mm O.D.
with Spade Lugs & 9ft Cord
Revere RTD-ADP2.1
This is a 9 foot white 20 AWG zip cord cable with a 2.1 x 5.5 mm plug on one end, and two 6-32 spade lugs on the other end. Polarity of connector is identified by a red stripe on one of the wires, which indicates the inside center of the plug.
Price: $3.49
|  |
| |
|
 | 2.1 mm I.D. 5.5mm O.D. Plug
to 2.1mm x 5.5 Jack
with 20 AWG 6ft Cord
CA205INL2056FT20AWG
This is an extension cord with a 2.1 x 5.5 mm plug at one end and a 2.1 x 5.5 jack at the other end. The plug's barrel length is 11mm long. The cord is 20 AWG.
Price: $2.95
|
| |
|
2.1 mm I.D. 5.5mm O.D. Plug
to 2.1mm x 5.5 Jack
with 18 AWG 6ft Cord
CA205INL2056FT18AWG
This is an extension cord with a 2.1 x 5.5 mm plug at one end and a 2.1 x 5.5 jack at the other end. The plug's barrel length is 11mm long. The cord is 18 AWG.
Price: $4.89
| |
| |
|
| | 2.1 mm I.D. 5.5 mm O.D.
with 6' Stripped End 18 AWG Cord
Philmore # TC218
Plug is molded to a six foot cable. The other end is stripped and tinned. Mates to:
- Inline jack: # 257
- Inline jack with cord: # 48-255, 48-257
- Chassis jack: # 209,247,321
- PC board jack: # 212
-
Wire Gauge: 18 AWG
- Barrel Length: 12.5 mm
- RoHS Comliant
Click Here for Catalog Picture
Price: $2.56
|
| |
|
2.5mm ID x 5.5 mm OD
To Solderless Terminal
Philmore 48-1262
This plug is a time saving and inexpensive way for installers to terminate cables with DC power jacks. Only a small Phillips screw driver is required. There is a molded plug on one end, and a solderless terminal at the other end of a 2" flexible cord. The polarity is indicated by a + on the terminal, which is connected to the tip (center) of the DC plug. The solderless terminal has a polarity marking and will accomodate up to 14 AWG wires. Both ends have a flexible strain relief.
- Mates with inline jack # 258
- Mates with inline jack with cord # 48-258
- Mates with chassis jack # 248, 249, 325, 2512
- Mates with PC board jack # 215
- Barrel Length:9 mm
Price: $1.96
| |
| |
|
| | 2.5 mm I.D. 5.5 mm O.D. Right Angle
with 6' Stripped End 24 AWG Cord
Philmore # TC250
Right angle plug is molded to a six foot cable. The other end is stripped and tinned. Mates to:
- Inline jack: # 258
- Inline jack with cord: 48-258
- Chassis jack: # 248,249,325
- PC board jack: # 215
-
Wire Gauge: 24 AWG
- Barrel Length: 11.50 mm
Click Here for Catalog Picture
Price: $1.96
|
| |
|
2.5 mm I.D. 5.5 mm O.D. Right Angle
with 6' Stripped End 20 AWG Cord
Calrad 55-839B-RT
Right angle plug is molded to a six foot cable. The other end is stripped and tinned. Mates with:
- Inline jack: # 258
- Inline jack with cord: #48-258
- Chassis jack: # 248,249,325
- Mates with PC board jack: # 215
-
Wire Gauge: 20 AWG
- Barrel Length: 10.0 mm
Price: $2.79
| |
| |
|
| | 2.5 mm I.D. 5.5 mm O.D. Right Angle
with 6' Stripped End 18 AWG Cord
Philmore # 48-228
Right angle plug is molded to a six foot cable. The other end is stripped and tinned. Mates to:
- Inline jack: # 258
- Inline jack with cord: #48-258
- Chassis jack: # 248,249,325
- PC board jack: # 215
-
Wire Gauge: 18 AWG
- Barrel Length: 12 mm
Click Here for Catalog Picture
Price: $2.56
|
| |
|
2.5 mm I.D. 5.5 mm O.D.
with 6' Stripped End 18 AWG Cord
Philmore TC258
Straight plug is molded to a six foot cable. The other end is stripped and tinned. Mates to:
- Inline jack: # 258
- Inline jack with cord: 48-258
- Chassis jack: # 248,249,325,2512
- PC board jack: # 215
-
Wire Gauge: 18 AWG
- Barrel Length: 12.2 mm
Click Here for Catalog Picture
Price: $2.56
| |
| |
|
| | 2.5 mm I.D. 5.5 mm O.D.
with 6' Stripped End 20 AWG Cord
Calrad 55-839B
Straight plug is molded to a six foot cable. The other end is stripped and tinned. Mates to:
- Inline jack: # 258
- Inine jack with cord: 48-258
- Chassis jack: # 248,249,325
- PC board jack: # 215
-
Wire Gauge: 20 AWG
- Barrel Length: 10.0 mm
Click Here for Catalog Picture
Price: $2.66
|
| |
|
2.5 mm I.D. 5.5mm O.D Plug
to 2.5mm x 5.5 Jack
with 20 AWG 6ft Cord
CA206INL2066FT20AWG
This is an extension cord with a 2.5 x 5.5 mm plug at one end and a 2.5 x 5.5 jack at the other end. The plug's barrel length is 11mm long. The cord is 20 AWG.
Price: $2.95
| |
| |
|
| | 2.5 mm I.D. 5.5mm O.D Plug
to 2.5mm x 5.5 Jack
with 18 AWG 6ft Cord
CA206INL2066FT18AWG
This is an extension cord with a 2.5 x 5.5 mm plug at one end and a 2.5 x 5.5 jack at the other end. The plug's barrel length is 11mm long. The cord is 18 AWG.
Price: $4.89
|
| |
|
3.3 mm I.D. 5.5 mm O.D.
and 1 mm Center Pin
with 6' Stripped End 24 AWG Cord
Philmore # 48-420
Plug is molded to a six foot cable. The other end is stripped and tinned. Mates to:
- Chassis jack: # 355
- In-Line jack # 264
- PC board jack: # 213
- Wire Gauge: 24 AWG
- Complies with EIAJ (Electronic Industries Association of Japan) class 4 or IV RC-5320 Standards.
Mates with Sony video camera model DS70
Click Here for Catalog Picture
Price: $1.72
| |
| |
|
| | 1.0 mm Center Pin 7.0 mm O.D.
with 6' Stripped End 24 AWG Cord
Philmore # 48-412
Plug is molded to a six foot cable. The other end is stripped and tinned. Mates with Super Nintendo Wire Gauge: 24 AWG
Click Here for Catalog Picture
Price: $2.49
|
| |
